专业传输设备供应商

Satellite Technology Transmission Equipment Provider

射频传输设备供应商

点击了解更多>>

用卫星畅联世界

Satellite Technology

比利时 Newtec MDM6000 卫星调制解调器

比利时 Newtec MDM6000 高速卫星IP调制解调器是一款多功能的新一代调制解调器。单个调制解调器最多可处理800个kpps，调制解调器完全符合DVB-S2和DVB-S2X标准。

市场价： 0.00

价格： 0.00

产品介绍

比利时 NEWTEC MDM6000 卫星调制解调器 Modem

产品描述

比利时 Newtec MDM6000 高速卫星 IP 调制解调器是一款多功能的下一代调制解调器，针对蜂窝回程、IP 中继和光纤恢复等广泛的应用进行了优化。 MDM6000 调制解调器通常安装在点对点卫星链路的两端或星形网络的远程站点。 NEWTEC MDM6000 High Speed 与常规 MDM6000 相同，增加了一个外部数据包处理器，该处理器处理封装、解封装、整形和 QoS，以实现比常规 MDM6000 提供的更高的 pps 性能。单个调制解调器最多可以处理 800 kpps。该调制解调器完全符合 DVB-S2 和 DVBS2X 标准，在最大服务可用性的情况下实现最高效率。

核心效率

比利时 Newtec MDM6000 高速卫星调制解调器结合了许多创新元素，以提高当前市场可用的效率，从而降低总体总拥有成本。

DVB-S2X 标准中高达 256APSK 的新调制和前向纠错 (FEC) 代码与创新技术相结合，例如 133 MBaud、Clean Channel Technology®、带宽消除 (BWC)、自动上行链路功率控制 (AUPC)、FlexACM® 、QoS、Shaping 和 Equalink® 3 嵌入在调制解调器中，使卫星链路达到最高效率。

根据应用，Newtec MDM6000 高速卫星调制解调器可与 Newtec HUB6000 卫星集线器结合使用。通过添加 Newtec 的网络优化技术，例如加速、压缩和带宽管理，可以进一步提高性能。

最佳可用性

比利时 Newtec 的自适应技术 FlexACM 集成在 MDM6000 调制解调器中，可应对衰落条件（雨、灰尘、干扰）和倾斜轨道卫星。多亏了 FlexACM，衰落将不再中断集线器和远程站点之间的传输，也不会导致数据丢失。在任何时候都可以实现最大可能的吞吐量。此外，自动上行链路功率控制机制可确保始终最大限度地利用链路预算。

比利时 NEWTEC MDM6000 卫星调制解调器 Modem

Input Interfaces

• Auto switching 10/100/1000 Base-T Ethernet interfaces

• Maximum rates: 425mbit/s bidirectional (200Mbit/s for imix traffic mix, 75kpps each direction)

• Layer 2 bridge function: ethernet over satellite (IPv6/VLAN/MPLS compatible)

• Layer 3 static router function: IPv4 packets over satellite

• Up to 100 routes

• Advanced QoS features

Adaptive Traffic Shaping on bitrate or symbolrate according to PIR/CIR

Flexible traffic classification on VLAN/MPLS/ IPv4/IPv6

• GSE, MPE, XPE or ULE Encapsulation/ Decapsulation of IP/Ethernet frames in DVB-S2, DVB-S2X and S2 Extensions

• Data filtering (downlink): Up to 64 receive filters

Modulation and Demodulation

SUPPORTED MODULATION SCHEMES AND FEC

• DVB-S2 (acc. ETSI EN 302 307 v1.2.1 for DVB-S2)

Outer/Inner FEC: BCH/LDPC

52 MODCODs (short & normal frames): QPSK: from 1/4 to 9/10

8PSK: from 3/5 to 9/10

16APSK: from 2/3 to 9/10

32APSK: from 3/4 to 9/10

• Newtec S2 Extensions Outer/Inner FEC: BCH/LDPC 54 MODCODs:

QPSK: from 45/180 to 144/180

8PSK: from 80/180 to 150/180

16APSK: from 80/180 to 162/180

32APSK: from 100/180 to 162/180

64APSK: from 90/180 to 162/180 29 Linear MODCODs:

8PSK-L: from 80/180 to 120/180

16APSK-L: from 80/180 to 162/180

64APSK-L: from 90/180 to 162/180

• DVB-S2X standard Outer/Inner FEC: BCH/LDPC

53 MODCODs (normal frames): QPSK: from 1/4 to 9/10

8PSK: from 3/5 to 9/10

16APSK: from 26/45 to 9/10

32APSK: from 32/45 to 9/10

64APSK: from 11/15 to 5/6

128APSK: 3/4; 7/9

256APSK: 32/45; 3/4

13 Linear MODCODs (normal frames): 8APSK-L: 5/9; 26/45

16APSK-L: from 1/2 to 2/3

32APSK-L: 2/3

64APSK-L: 32/45

256APSK-L: 29/45 to 11/15

41 MODCODs (short frames): QPSK: from 11/45 to 8/9

8PSK: from 7/15 to 8/9

16APSK: from 7/15 to 8/9

32APSK: from 2/3 to 8/9

• FlexACM® controller (optional)

• FlexACM® client embedded in MDM6000 modem (optional)

• Automatic Uplink Power Control

BAUD RATE RANGE

• Modulator: 256 kbaud - 72MBaud

• Class 1 Demodulator: 1 - 60Mbaud (depending on MODCOD)

• Class 2 Demodulator: 256kbaud - 72Mbaud

FRAME LENGTH

• Short frames of 16200 bits for DVB-S2 and DVB-S2X

• Normal frames of 64800 bits for DVB-S2, DVB-S2X and Newtec’s S2 Extensions

CLEAN CHANNEL TECHNOLOGYTM

• Roll-off : 5% -10% -15% -20% - 25% - 35%

• Optimum carrier spacing

• Advanced filter technology

AUTOMATED EQUALINKTM 2.0

• Linear pre-distortion

• Non-linear pre-distortion for all modcods

CARRIER INTERFERENCE REDUCTION

• DVB RF Carrier ID

(CID according ETSI TS 103 129 v1.1.1)

• Spread Spectrum Modulator (BPSK)

• Supports User Data

• Compliant to DVB Standard

Modulation Interfaces

L-BAND

• Connector N(F), 50 ohms (optional SMA adapter)

• Frequency 950 - 2150 MHz (10 Hz steps)

• Level -35/+7 dBm (+/- 2dB)

• Return loss > 14 dB

• Switchable 10MHz Reference

• Spurious performance

Better than - 65 dBc/4kHz @ +5 dBm output level and > 256kBaud

Non-signal related: < - 80 dBc @ +5 dBm output

IF-BAND

• Connector BNC (F) - 75 ohms

(intermateable with 50 ohms)

• Frequency 50 - 180 MHz (10 Hz steps)

• Level -35/+10 dBm (± 2 dB)

• Return loss 50 ohms : > 14 dB

75 ohms : > 20 dB

• Spurious performance

Better than - 65 dBc/4kHz @ +5 dBm output level and > 256kBaud

Non-signal related:< - 80 dBc @ +5 dBm output

L-BAND MONITORING

• Connector SMA (F), 50 ohms

• Frequency Same as L-Band output

frequency or 1050 MHz in case of IF output option only

• Level -45 dBm

• Return loss > 10 dB

10 MHZ REFERENCE OUTPUT (OPTIONAL)

• Connector BNC (F), 50 ohms

• Output level +3 dBm (+/- 2dB)

BUC POWER (OPTIONAL)

• Max. current: 3.8A

• Voltage: 24V, 48V (Software controlled)

Demodulation Interfaces

DUAL L-BAND INPUT

• Connector 2 x F-type (F), 75 Ohms

• Return loss > 7 dB (75 Ohm – F(F))

• Maximum total input power: - 10 dBm

• Maximum input signal power: (-30 + 10log(f))dBm where f=baud rate in Mbaud

• Minimum input signal power: (-80+Es/ No(thr)+10log(f))dBm where f=baud rate in Mbaud and Es/No(thr)= Es/No value in dB for QEF reception

• Frequency 950 - 2150 MHz

• Adjacent signal < (Co+7) dBm/Hz with

Co = signal level density

IF-BAND INPUT (REPLACES ONE L-BAND INPUT)

• Connector BNC (F) - 75 ohms

• Return loss > 15 dB

• Level See L-band input level spec above + 10dBm

• Frequency 50 - 180 MHz

• Adjacent signal < (Co+7) dBm/Hz with

Co = signal level density

LNB POWER AND CONTROL

• Max. current 350 mA

(on selected IFL input)

• Voltage

11,5 -14 V (Vertical polarization)

16 -19 V (Horizontal polarization) & additional 22 kHz +/- 4KHz (band selection according to universal LNB for Astra satellites & DiSEqC command transmission)